S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06)

5.1 Before Calling for Assistance

1.If difficulty is encountered when installing or operating the unit, refer back to

the Installation Section of the applicable chapter of this manual. Also check to make sure that the various components of the network are interoperable.

2.Check the cables and connectors to ensure that they have been properly connected and the cables/wires have not been crimped or in some way impaired during installation. (About 90% of network downtime can be attributed to wiring and connector problems.)

3.Make sure that an AC power cord is properly attached to each Magnum S14- Series & PS14P(PoE) unit. Be certain that each AC power cord is plugged into a functioning electrical outlet. Use the PWR LEDs to verify each unit is receiving power.

4.If the problem is isolated to a network device other than the Magnum

S14-Series & PS14P(PoE) 10/100 Mb/s switch product, it is recommended that the problem device is replaced with a known good device. Verify whether or not the problem is corrected. If not, go to Step 5 below. If the problem is corrected,

www . GarrettCom . com

64

Page 71
Image 71
GarrettCom PS14P manual Before Calling for Assistance

PS14P specifications

The GarrettCom PS14P is a robust and versatile industrial Ethernet switch designed to meet the demanding needs of industrial environments. Known for its reliability, the PS14P has been optimized for mission-critical applications found in the transportation, utility, and manufacturing sectors.

One of the standout features of the GarrettCom PS14P is its ability to operate in harsh conditions. With an extended operating temperature range, the PS14P is suitable for deployment in environments where temperatures can vary significantly. This ruggedness is further enhanced by its industrial-grade metal enclosure, providing superior protection against dust, vibrations, and electrical interference.

The PS14P offers 14 Ethernet ports, with options for both 10/100Mbps and Gigabit connectivity, allowing for versatile configurations depending on the specific networking requirements. This flexibility enables the integration of various devices and systems, including sensors, cameras, and other IoT devices, which are increasingly proliferating in modern industrial applications.

In terms of technologies, the GarrettCom PS14P supports a range of advanced networking features. It includes the ability for Power over Ethernet (PoE) on several ports, which simplifies installations by allowing the same cable to deliver both data and power to connected devices. This is particularly beneficial for powering remote devices such as IP cameras and wireless access points in locations without easy access to power outlets.

The switch also supports VLAN tagging, enabling network segmentation that can enhance security and performance. With Quality of Service (QoS) capabilities, it prioritizes critical traffic, ensuring that time-sensitive data is transmitted without delay, which is essential for real-time monitoring and control applications.

Moreover, the GarrettCom PS14P is equipped with various redundancy features to guarantee high availability. This includes support for Rapid Spanning Tree Protocol (RSTP) and network redundancy protocols that help maintain continuous operation, crucial for industries that cannot afford downtime.

In summary, the GarrettCom PS14P is a feature-rich industrial Ethernet switch that excels in reliability, versatility, and performance. Its rugged construction, extensive connectivity options, advanced networking technologies, and redundancy features make it an ideal choice for organizations seeking to enhance their industrial networking capabilities in challenging environments. Whether it’s for a manufacturing floor, utility networks, or transportation systems, the PS14P is engineered to provide a stable, efficient, and secure networking solution.