GarrettCom TB14H manual GND can be hooked up at the last

TB14 and TB14H 10Mb Media Converters Installation and User Guide (09/04)

The connection procedure is straightforward. Simply insert the DC leads to the TB14H’s power terminals, positive (+) and negative (-) screws. The use of Ground (GND) is optional; it connects to the TB14H chassis. Ensure that each lead is securely tightened from the top, as shown here.

NOTE: Always use a voltmeter to measure the voltage of the incoming power supply and figure out the +ve potential lead or -ve potential lead. The more +ve potential lead will connect to the post labeled “+ve” and the rest to the “-ve”.

The GND can be hooked up at the last.

When power is applied, the green PWR LED will illuminate.

www . GarrettCom . com

40