GarrettCom TB14H manual Termination Switch for details

4.5 BNC port, Internal

TB14 and TB14H 10Mb Media Converters Installation and User Guide (09/04)

Connect the ThinNet coax cable to the BNC connector on the TB14s Media Converter in the same manner as is done for any standard BNC connection. Be sure that the BNC segment is properly terminated using a standard “T” connector.

The TB14s media converter is also equipped with “Terminator Switch” (∝-50Ω), which can be used to eliminate the standard “T” connector by moving the “Terminator Switch” to 50Ω. See Section

Termination Switch for details.

www . GarrettCom . com

34