Gateway 7210 Closing the case

Closing the case 27
Closing the case
Close the chassis as soon as you finish installing or removing components
so that dust and dirt do not collect inside the computer.
Replacing the side panel
Closing the side panel covers the internal components. You must close the
side panel and replace the front bezel before you can operate the server. If
you do not, a system intrusion event is logged by the system management
hardware. Be careful not to pinch any cables in the panel as you replace it.
To replace the side panel:
1Hold the side panel at an angle to the chassis and 3/4-inch forward.
Engage the retaining tabs on the bottom edge of the panel with the slots
at the bottom edge of the chassis.
2Swing the top of the panel toward the chassis, engaging the retaining
tabs on the top edge of the side panel with the slots on the chassis.
3Slide the panel toward the back of the chassis 3/4-inch, securing it in
place.
8505945.book Page 27 Thursday, March 9, 2000 2:13 PM