Converting to rackmount

To convert the server to a standard 19-inch (48.26 cm) rack-mountable drawer, you need to remove the unneeded hardware and tower bezel, then install the new bezel and mounting hardware. If your system came configured for rack installation, go to “Installing the system drawer side rails” on page 8.

Removing the top panel

To remove the top panel:

1Turn off system power, then disconnect the power cord and all the peripherals.

2Make sure the server is on a stable surface, such as a table or counter.

Warning In order to avoid injury or dropping the server, Gateway recommends that two people lift the server.

3Unscrew the captive thumbscrew on the back access panel.

4Slide the back access panel toward the back, then pull outward to remove.

Back access panel

Captive thumbscrew

2Installation