
Power Strip | Total Supported Devices | ||
Configuration |
|
|
|
|
|
|
|
115 VAC | 15 amp | ■ | System drawer only |
|
|
|
|
| 20 amp | ■ | System drawer with other |
|
|
| peripherals not to exceed a total of |
|
|
| 16 amps for the whole strip. |
|
|
|
|
If rack mounted units are installed in a closed or
Turning on the system drawer
To turn on the system drawer for the first time:
1If using a UPS, turn it on first.
2Turn on the monitor and any additional devices connected to the system drawer. Listen for alarms which may indicate power problems.
3If multiple system drawers and a switch box are installed, press the switch box button that corresponds to the system drawer being turned on.
4Press the ON/OFF button on the system drawer.
Important If multiple system drawers are installed, you must turn on each system drawer and wait for it to start completely before turning on the next system drawer.
5Listen for alarms which may indicate power problems.
6Make sure the power indicator is illuminated. The monitor should display the normal Power On
26Installation