Gateway 8400 Turning off the system drawer, To turn on the system drawer using normal start sequences:, To turn off the system drawer:

7When the system drawer starts successfully, install the operating system, if necessary.

8Turn on the other system drawers by repeating Steps 3 through 7 for each additional system drawer installed.

After this procedure, the system drawer can be turned on using normal start sequences.

To turn on the system drawer using normal start sequences:

1Turn on devices and drawers attached to the system drawer first.

2When the devices and drawers attached to the system drawer are running, turn on the system drawer.

Turning off the system drawer

To turn off the system drawer:

1Close all programs.

2If necessary, issue a “flush” command to write the contents of any caches or buffers to disk.

3If necessary, issue a command to exit or quit the operating system.

4Press the ON/OFF switch on the system drawer.

5Turn off any other devices and drawers connected to the system drawer.

Turning off the system drawer 27