Attaching the cables to the retractor
To attach the cables:
1Route the cables from the back of the system drawer to the cable retractor.
2Attach the cables to the cable retractor, making sure the cables have sufficient slack when the system drawer is pulled forward and pushed back into place.
Cable retractor | Cable |
|
3Route the cables to their destinations and attach as necessary.
4If necessary, bundle any excess cable.
Completing the connections
Now that the system drawer is installed in the cabinet, make the system connections.
Important A wide variety of system connections are possible. Your actual system connections may be different from the following examples.
Completing the connections | 21 |