Tip:
When synchronizing the wireless keyboard and mouse, make sure that you synchronize (teach) both the keyboard and mouse during the same Learning mode session. If you synchronize one wireless device and later enter the Learn mode to synchronize the other wireless device, the Learn mode erases all previous learned settings from memory and looks for new devices.
After the Teach/Learn sequence is complete, the receiver, keyboard, and mouse remain synchronized after turning off your Family Media Center or changing the channels the devices operate on. You only have to perform the Teach/Learn sequence when the devices are first installed or when adding additional devices to the system. For more information about changing the mouse or keyboard channels, see “Changing the keyboard or mouse channels” on page 34.
To synchronize the wireless mouse and keyboard
1 Before synchronizing the mouse and keyboard, make sure that the batteries are installed in the keyboard and the battery pack is fully charged and installed in the mouse. For more information, see “Setting up and synchronizing the wireless keyboard and mouse” on page 8.
2 Press and hold the Learn button on your Family Media Center for 2 seconds then release the button. The Status light on the Family Media Center’s front panel blinks slowly to indicate the receiver is in the Learn mode.
Learn button
10