Gateway Flat Panel Television PIP/POP, OSD Menu, Description

Chapter 3: Adjusting Your Plasma TV Settings

OSD Menu			Description
PIP/POP			PIP. Turns PIP mode on or off. When PIP is
			turned on, you can display two pictures at one
	PICTURE SOUND PIP/POP TV OTHER		time. One picture is displayed on the full screen
	PIP	OFF
			and the other picture is displayed in a small
	SOURCE	TV
			window. The picture on the full screen is the main
	POSITION	FIXED
	H-LOCATION	RIGHT	picture. The picture in the window is the
	V-LOCATION	TOP	sub-picture.
	SWAP	DISABLE
	POP	OFF	You can use PIP mode if your video input source
	SOURCE	TV	is set to TV, AV, S-Video, Component 1, or
	SCREEN RATE	FULL
	SWAP	DISABLE	Component 2 and the video input source is 480i
			or lower (such as a non-progressive DVD player).
	SELECT ITEM	ADJUST VALUE
			PIP mode does not work with component video

input sources higher than 480i (such as an HDTV set-top box or progressive DVD player), RGB, or DVI video sources.

SOURCE. Changes the video input source of the sub-picture when PIP is turned on.

POSITION. Moves the sub-picture within the screen.

FIXED lets you use the H-LOCATOR and V-LOCATOR options to place the sub-picture in one of the four corners of the screen.

VARIABLE lets you use the H-LOCATOR and V-LOCATOR options to move the sub-picture anywhere within the screen.

H-LOCATION.Moves the sub-picture left or right.

V-LOCATION.Moves the sub-picture up or down.

SWAP. Swaps the picture and the sub-picture.

38 www.gateway.com