CHAPTER 1: Using Your Gateway Flat-Panel Monitor

To install the speaker bar:

Tip

For easier installation, first rotate the monitor into portrait mode so you can install the speaker bar from the side.

1Tilt the screen back, then match the tabs on each side of the speaker bar with the slots underneath the monitor.

Mounting slot

Mounting tabs

2Slide the speaker bar onto the bottom of the monitor until it snaps into place. Make sure that it is secure by pulling it downward.

3Plug the speaker bar’s power plug into the power connector underneath the monitor, then connect the speaker bar’s headphone and microphone cables to your computer.

For information on using the speaker bar, see “Using the speaker bar” on page 23.

12