CHAPTER 1: Using Your Gateway Flat-Panel Monitor

Connecting video inputs

To connect video sources to your monitor:

Tip

Rotate the screen 90° to make it easier to connect the cables.

1Position your computer and the monitor so you can reach the back of each.

2Connect the blue VGA video cable to the blue VGA video connector under the back of the display.

- OR -

If your computer has a digital video connector (DVI), connect a DVI video cable to the white connector under the back of the display.

3Make sure that your computer is turned off, then connect the other end of the video cable to the matching video port on the back of your computer.

4