www.gateway.com

To remove the speaker bar:

1Disconnect all audio and power cables from the speaker bar.

2Press the two release buttons on the back of your monitor, then pull the speaker bar down.

Release button

Starting the monitor

Using the EzTouch menu buttons

This monitor features an on-screen display (OSD) and EzTouch menu buttons that let you turn the monitor on and off, and adjust contrast, brightness, and other settings. For more information on EzTouch buttons, see “Using the EzTouch menu buttons” on page 14.

Turning on the monitor

To start the monitor:

1Press the power button on the front of monitor. The power LED on the power button changes from purple (off) to blue (on).

2Turn on your computer. After your computer is running, the power LED on the monitor’s power button should be blue. Allow about 10 seconds for the display image to appear. If the power LED is not blue or you do not see a display image, check the connections. For more troubleshooting information, see “Troubleshooting” on page 24.

3Adjust the tilt of the monitor for the best viewing angle.

4After you see the Windows desktop, press the (Menu) button on the front of your monitor, then press (Auto) to automatically adjust your display image to the ideal settings.

13