Important
If, after the monitor is turned on, it does not find an active video input, the monitor enters into standby and the power LED turns orange. To manually switch
inputs, touch (Menu), then select the input from the on-screen list.

www.gateway.com

Using the shortcut menu

To use the shortcut menu:

1Touch (Menu) on the front of your monitor. The rest of the button icons light up and the shortcut menu opens. (The menu’s appearance and choices vary, depending on the currently active video input and whether the speaker bar is attached.)

Important

The buttons are very sensitive, and may be “pressed” by holding your finger just above its surface. To completely “release” a touch button, make sure that you lift your finger well away from the button.

2To use an EzTouch menu button, lightly touch its icon. For adjusting a setting’s values, you can press and hold touch buttons as you would conventional buttons.

Theme Select (Volume Adjust when optional speaker bar is connected)

Input Select (Mute when optional speaker bar is connected)

Auto (Input Select when optional speaker bar is connected)

PIP On

PIP Settings

Cancel

Main Menu

Touch the (Theme Select) buttons to cycle through the preset video themes (brightness, contrast, and temperature configurations):

UserMovieGamePictureWebWarmCool

Touch (Input Select) to cycle through the available video sources.

Touch (Mute) to mute the optional speaker bar. This option is only available when the optional speaker bar is connected.

Touch (Auto) to automatically adjust your display image to the ideal settings. This option is only available when the video input is VGA.

Touch (PIP On) to turn on Picture-in-Picture, and touch (PIP Settings) to adjust the PIP position, size, and other advanced PIP settings.

9