59
Analog Audio/Video recording
www.gateway.com
Tuning to preset stations
To tune to preset stations:
1If you are using the buttons on the receiver, repeatedly press the TUNE
MODE button on the receiver to select Preset mode. The PRESET light turns
on.
- OR -
If you are using your remote control, go to the next step.
2Press the up and down TUNING/PRESET buttons on the receiver or the
–and+
PRESET buttons on the remote control to select the desired preset
number (1~30).
You can scan all of the preset stations in sequence by pressing the P. SCAN
button on your remote control. The receiver pauses at each preset station for
5 seconds. When the station you want is tuned, press the button again to stop
scanning.
Analog Audio/Video recording
■The analog signals (except front L/R channel) from the 7 CH DIRECT
inputs and the digital signals from the coaxial or optical digital inputs
cannot be recorded.
■The volume and tone (bass and treble) settings have no effect on the
recording signals.
To record with TAPE:
1Press the INPUT SELECTOR button on the receiver or the direct input
selector button on the remote control to select the input for your recording
source. You cannot select TAPE.
2Start recording on the connected TAPE component.
3Start playing on the selected input (recording source).