
CHAPTER 3: Recovering Your Systemwww.gateway.com
Important | 7 Click OK. The program prepares the recovery files, then records the |
Use a permanent marker to label each | recovery files to the blank disc(s). |
disc “Gateway Driver and Application |
|
Recovery.” As you remove each disc from |
|
the drive, use the marker to label each |
|
disc 1 of x, 2 of x, 3 of x, and so on. |
|
8If a message tells you to insert another blank disc, remove the completed disc, then insert a blank disc.
9When you see the message “The Recovery ISO Image has been created successfully,” remove the last disc from the drive, then click OK.
10Store the discs in a safe place for future use. You are done.
Copying drivers and applications recovery files to a network
You can copy driver and application recovery files to a network location, so you can burn unlimited sets of drivers and applications recovery discs from a different notebook that has a recordable drive.
To copy drivers and applications recovery files to a network:1Click Start, All Programs, System Recovery, then click Create My
30