235

Troubleshooting
www.gateway.com
Diskette drive

The diskette drive is not recognized

Shut down and restart your computer.

You cannot save a file to diskette or you see the message “di sk is full

or write-protected”

Make sure that the write-protection tab on the upper-right corner of the
diskette is down (unprotected).
Delete unnecessary files on the diskette and try again.
Make sure that the diskette you are using is IBM-compatible.
Try a different diskette. Occasionally diskettes are flawed and cannot be
read by the diskette drive.
Run Error-checking on the diskette. For more information, see “Checking
hard drive space” on page 189. If errors are detected and corrected, try
using the diskette again.

You see a “Access Denied” or “Write protect” error message

Move the write-protection tab in the upper-right corner of the diskette
down (unprotected).
The diskette may be full. Delete unnecessary files on the diskette and try
again.
Make sure that the diskette you are using is IBM-compatible.
Try a different diskette. Occasionally diskettes are flawed and cannot be
read by the diskette drive.

You see a “Disk is full” error message

Delete unnecessary files on the diskette.
Try a different diskette. Occasionally diskettes are flawed and cannot be
read by the diskette drive.
Run Error checking on the diskette. For more information, see “Checking
the hard drive for errors” on page191. If errors are detected and corrected,
try using the diskette again.