Installing the 5- and 8-port switches

Installing the 5- and 8-port switches

Package contents

Open the shipping carton and carefully unpack its contents. The carton should contain the following items:

One Gateway 7401-05 5-port, or 7401-08 8-Port 10/100/1000BASE-T Gigabit Ethernet switch

Four rubber feet with adhesive backing

One external power adapter

This manual

If any item is found missing or damaged, contact Gateway for a replacement.

Attaching the rubber feet

Position and apply rubber feet to the underside of the switch.

Provide for adequate ventilation

Warning Do not place any device on top of the switch or place the switch on top of any device or object that will block the free flow of air through the ventilation slots on the sides, top, and bottom of the switch’s case. In addition, care should be taken not to locate the switch next to, on top of, or underneath any device that generates a significant amount of heat. For the switch to perform at its optimal level, the switch must have adequate ventilation to prevent the switch from overheating and becoming damaged.

Power on

Plug one end of the AC power adapter into the power connector on the switch and the other end into the local power source outlet.

www.gateway.com

11