
Installing the 16- and
3 With the assistance of another person, hold the switch in place in the rack and secure with two screws and nuts on each side (provided.
4 Install the cables and power cord.
Power on
Plug one end of the AC power cord into the power connector of the switch and the other end into the local power source outlet.
After the switch is turned on, the LED indicators will momentarily blink. This blinking of the LED indicators represents a reset of the system.
Power failure
If a power failure occurs, unplug the switch. When power is resumed, plug the switch back in.
www.gateway.com | 15 |