Installing the 16- and 24-port switches

Installing the 16- and 24-port switches

Package contents

Open the shipping carton of the switch and carefully unpack its contents. The carton should contain the following items:

One Gateway 7201-16, 16-port or 7201-24, 24-port 10/100BASE-T Fast Ethernet switch, or 7401-24, 24-port 10/100/1000BASE-T Gigabit Ethernet switch, or 7401-24.2, 24-port + 2 10/100/1000BASE-T Gigabit Ethernet switch.

Accessory pack, including 2 mounting brackets and screws.

Four rubber feet with adhesive backing.

One AC power cord.

This manual.

If any item is missing or damaged, contact Gateway for replacement.

Installing the 16- and 24-port switches without a rack

When installing the switch on a desktop or shelf, you should attach the rubber feet included with the switch on the bottom, at each corner of the device. Allow enough ventilation space between the switch and any other objects in the vicinity.

Warning Do not place any device on top of the switch or place the switch on top of any device or object that will block the free flow of air through the ventilation slots on the sides, top, and bottom of the switch’s case. In addition, care should be taken not to locate the switch next to, on top of, or underneath any device that generates a significant amount of heat. For the switch to perform at its optimal level, the switch must have adequate ventilation to prevent the switch from overheating and becoming damaged.

www.gateway.com

13