Page 3-1 © 2004 General Binding Corporation
Operations Manual Polaris II
3.0 SpecificationsThis section provides specific information regarding the
laminator. Any specification not provided must be
requested from GBC.
3.1 Film and sheet size
Film – Single side films
(ie., GBC LAYFLAT, GBC HI-TAC)
Core – 3 in. (7.6 cm)
Sheet Size – Min. 11.0 in. x 8.5 in. (28x 20 cm)
– Max. 25 in. x 25 in. (64 x 64 cm)
Sheet Weight – Min. 24 lb. bond
– Max. 10 pt. board
Pile Height – 17 in. (44 cm)
Main Roll Diameter- 10.0 inches (24 cm)
3.2 Functions
Speed < up to 50 ft./ min (6 m/ min.)
Temperature – 7 Settings
225, 240, 250, 260, 270,
280, 290 deg. F
3.3 Weight
Unpacked – 1870 lbs. (850 kilograms)
Shipping Weight – 2156 lbs. (980 kilograms)
3.4 Dimensions (W x H x D)
Refer to Figures 3.4.1 Dimensions.
Machine – 50.5 in. x 54 in. x 85 in.
– (128.25 cm. x 137 cm. x 216 cm)
– 105” long with delivery table
3.5 Electrical requirements
INFORMATION: Refer to the serial plate located
on the rear of the laminator for specific electrical
ratings applicable to the unit.
Voltage – 230VAC ~ 60Hz
Current – 42A (50 AmpCircuit Breaker)
Power – 9660 W
Wall Receptacle – NEMA 6-50R
3.6 Recomended Work Area
The Polaris should have a working area of 12 ft X 16 ft
for ease of opperation and safety purposes.