Polaris II

Operations Manual

 

 

(18)PAPER GUIDE PIN: The paper guide pin allows the operator to raise the finish product up to the knife separator for a smooth feed into the knife separator. See

Figure 5.1.9.

Figure 5.1.9 Paper Pin

P A P E R P IN

P A P E R P IN K N O B

(19)SUPPLY SHAFT: The supply shaft holds the film supply and the core adapters hold the rolls of film on the film shaft.

(20)CORE ADAPTERS: The film shaft holds the supply roll while the core adapters hold the rolls of film on the shaft.

(21)FILM TENSION CONTROL: Allows the operator to increase or decrease film web tension as necessary to reduce curl and wrinkles. Refer to Section 5.2 Film Tension for more information on tension.

(22)EMERGENCY STOPS: The emergency stops are located on top of the laminator. They can be located

by the yellow hazard stickers and should be used to stop the machine in the event of an emergency. The emergency stop removes power from the machine.

(23)NIP POINT: The point at which two rollers come into contact. The nip point of the heat rollers is the place at which the items for lamination are introduced into the laminator.

CAUTION: Only feed acceptable materials through the nip of the rollers. Unacceptable materials may create unsafe conditions.

(24)FILM WEB: Laminating film loaded into the machine

(25)CONTROL PANEL: The control panel is located on the top, control side of the machine.

(26)FILM SUPPORT ARM: Arm used to support the drive side of the air shaft. See Figure 5.1.10.

(27)SUPPORT LOCKING PIN KNOB: Locateded on film support arm. Turn knob to lock air shaft to support arm. See Figure 5.1.10.

Figure 5.1.10 Film Support Arm

S U P P O R T L O C K I N G

P I N K N O B

F I L M S U P P O R T

A R M

Page 5-4

© 2004 General Binding Corporation

Page 19 Page 21
Page 20
Image 20
GBC 930-115 manual Paper Pin
Page 19 Page 21

930-115 specifications

The GBC 930-115 is a state-of-the-art industrial-grade machine designed primarily for the specialized needs of laminating and finishing applications. Known for its robust performance and exceptional efficiency, the GBC 930-115 has become a preferred choice for businesses looking for high-quality lamination solutions.

One of the main features of the GBC 930-115 is its versatile lamination capabilities. The machine accommodates a wide range of media types and sizes, making it ideal for both small print shops and large production environments. With its ability to laminate print materials up to 13 inches in width, it allows users to process various documents such as flyers, posters, and photos with laser precision.

Equipped with advanced technologies, the GBC 930-115 boasts an intuitive control panel that simplifies operation. The user-friendly interface allows for easy adjustments to temperature and speed settings, enabling precise control over the laminating process. This feature is crucial for ensuring that materials are laminated to perfection without compromising quality.

Another notable characteristic of the GBC 930-115 is its high-speed production capabilities. The machine can reach speeds of up to 25 feet per minute, significantly improving workflow efficiency and reducing turnaround times. This is particularly beneficial for businesses with high-volume demands, as it allows for the quick processing of large batches without sacrificing quality.

The durability and construction of the GBC 930-115 further enhance its appeal. Built with a sturdy frame and high-quality components, this machine is designed to withstand the rigors of daily use in demanding environments. The reliable heating system ensures consistent temperature control, while the advanced rollers facilitate smooth feeding and lamination, eliminating issues such as jams and misalignment.

The GBC 930-115 is also designed with safety in mind. It includes automatic shut-off features that protect both the machine and its operator from potential hazards. This focus on safety ensures that users can operate the machine with confidence.

In summary, the GBC 930-115 stands out in the industry for its versatile functionality, high-speed performance, user-friendly operation, and robust construction. These features make it an invaluable asset for any business involved in laminating, ensuring high-quality results that meet both customer and industry standards.
Top Page Image Contents