GBC Laminator F-60 Operation and Maintenance Manual, DXWLRQin an emergencyDUQLQJ. /DEHO/RFDWLRQV

F-60 Operation and Maintenance Manual

CAUTION

Use only 80% isopropyl alcohol or a rubber cement eraser to clean the laminating rolls.

Harsh chemicals like toluene, acetone or MEK

destroy the silicone covering of the rolls.

CAUTION

Raise the upper main roll when the laminator is not in operation. Prolonged contact can damage the rolls.

CAUTION

Excess pressure can damage the laminating rolls. Always select the minimum roll pressure necessary to complete the task.

CAUTION

If silicone adhesive contacts the upper or lower

roll, remove it IMMEDIATELY using 80%

isopropyl alcohol. It can harden within an hour

and ruin the roll.

WARNING

The operating environment must be free of dust,

flammable liquids and vapors. You can be injured by inhaling chemical vapors. Vapor build up or stored flammable liquids can cause a fire. Excessive dust can damage the laminator.

CAUTION

Do not use a knife or other sharp instrument

during installation or while servicing the

laminator. You can cause irreparable damage to

the rolls.

WARNING

Do not attempt to move the laminator across anything other than a flat, level surface without trained and qualified riggers. You can be crushed or seriously injured.

The F-60 Laminator is a large and heavy piece of equipment. It is necessary to employ LICENSED RIGGERS ONLY to move the machine. GBC Pro-Tech’s warranty does not cover malfunction of the equipment due to mishandling.

GBC Pro-Tech bears no responsibility for personal injury or damage due to moving the laminator improperly.

WARNING

Do not operate the laminator if the power cord is damaged or frayed. You can be severely shocked, electrocuted or cause a fire. Contact a qualified electrician to replace the cord.

WARNING

Do not allow anything to rest on the power cord. Do not locate the cord where people can walk on it. You or others can be severely shocked, electrocuted or cause a fire.

Always use good safety practices when operating or servicing the laminator and know how to react quickly

&DXWLRQin an emergency￿:DUQLQJ. /DEHO/RFDWLRQV

Posted at various locations on your F-60 Laminator are important safety labels. PAY CAREFUL ATTENTION TO THESE LABELS AT ALL TIMES! Figure 1-4 shows the location of each of these labels.

© GBC Pro-Tech 1998 July 1-3