GE 0150-0255C Creating a Timed Recording: , Editing a Timed Recording:

Kalatel VDR 4-4 0150-0255C
Creating a Timed Recording:
1. Using the Arrow buttons to navigate, highlight the DATE parameter of the last line item (indicated
with double dash marks).
2. Press the Enter button to enter the Edit mode. EDIT MODE will appear on-screen, in the lower
left-hand corner of the Timer Settings menu. The user may press the Enter button to exit Edit
mode at any time.
3. Use the Arrow buttons to change the values of the DATE setting.
Date (Day of the Month) 1 through 31
Day of the Week Monday through Sunday
Range of Days All Weekdays (Monday-Friday), All Weekend Days (Saturday-Sunday),
Monday-Sunday (Everyday)
4. When finished entering the Date, use the Arrow buttons to navigate the START setting.
5. Use the Arrow buttons to enter the time the recording will begin. The Hours and Minutes are
edited separately. The start and stop times are always configured in a 24-hour clock. When
finished entering the start time, use the Arrow buttons to navigate to the STOP setting.
6. Use the Arrow buttons to enter the time the recording will end. Entering a time "before" the start
time will cause the unit to record until the indicated stop time on the next day. When finished
entering the stop time, use the Arrow buttons to navigate to the SPD setting.
7. Use the Arrow buttons to enter the record speed in pictures per second.
NTSC Record Speeds 60, 30, 20, 10, 5, 3, 2, 1, 0.5, 0.2, 0.1, 0.0
PAL Record Speeds 50, 25, 17, 10, 5, 3, 2, 1, 0.5, 0.2, 0.1, 0.0
8. When finished entering the Record Speed, use the Arrow buttons to navigate to the QUALITY
setting.
9. Use the Arrow buttons to enter the record quality (Low, Medium, or High). Higher record quality
settings use more disk space.
10. When finished entering the Record Quality, use the Arrow buttons to navigate to the ON/OFF
setting.
11. Use the Arrow buttons to Activate, Deactivate, or Delete the recording.
12. When finished, press the Enter button to exit the Edit mode. Use the Arrow buttons / Arrow
buttons to navigate to [OK], then press the Enter button to complete the selection.
Editing a Timed Recording:
1. Using the Arrow buttons to navigate, highlight the event parameter you wish to edit.
2. Press the Enter button to enter the Edit mode. EDIT MODE will appear on-screen, in the lower
left-hand corner of the pop-up menu.
3. Use the Arrow buttons to change the values. Use the Arrow buttons to navigate among
parameters in the same row.
4. When finished, press the Enter button to exit the Edit mode. Use the Arrow buttons to navigate
to [OK], then press the Enter button to complete the selection.