LEDs
The various front panel LEDs have the following meaning:
• LAN / Netlink
Status Meaning
Off No LAN connection detected
LAN connection established, no communication
On
LAN connection established, receive or transmit active
Blink
• UPS / Fail
Status Meaning
OK / No Fault
Off
No UPS Connection
On
• Active
Status Meaning
Fault of device
Off
Device OK / No fault
Blink
Each SNMP/Web adapter provides the following features:
• 10/100 Mpbs connection speed
• Use of DHCP / BOOTP or manual configuration for the TCP/IP network settings
• SNMP Agent
• Web server
• Console interface
• UPS status / alarms / readings, event logging over different interfaces
• Digital outputs (open-collector outputs for relay drive) – 1-ph plug-in version only
• SNMP Traps and E-mail notification upon UPS event
• Advanced security features
ARCHITECTURE DIAGRAM
UPS Windows Linux UNIX
Ethernet
Local console
NOTE:
only required for
configuration
UTP
1:1 RS232
10/100 Mbit/s
Contact i/f
(1-ph plug-in version only)
Modifications reserved Page 12/24
ISG_CNT_SNM_BAS_CRD_1GB_V012.doc Installation Guide SNMP/Web Adapter