4 CONFIGURATION
4.1 CONFIGURATION METHODS
The SNMP/Web plug-in adapters can be configured using different interfaces.
4.1.1 Configuration via serial connection
• Connect the SNMP adapter to a computer using a standard 1:1 serial communication cable.
• Run a terminal simulator (e.g. HyperTerminal on a PC running Windows)
• Configure the terminal simulator as follows:
115,200bps, 8 data bits, 1 stop bit, parity none, flow control none
Terminal emulation VT-100
• Establish the connection and press <enter>
• The default username (login) and password are ge and ge
• A command-line configuration interface is entered. Type menu to enter the quick network
configuration menu:
Modifications reserved Page 19/24
ISG_CNT_SNM_BAS_CRD_1GB_V012.doc Installation Guide SNMP/Web Adapter