PLEASE READ AND SAVE THESE

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic safety pre- cautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1.Read all instructions before using the appliance.

2.To avoid fire or shock hazard, plug the appliance directly into a 120V AC electrical outlet.

3.If the filter is covered by a bag when shipped: Remove plastic bag over filter before use.

4.Keep the cord out of heavy traffic areas. To avoid fire hazard, NEVER put the cord under rugs, near heat registers, radiator, stoves, or heaters.

5.Close supervision is necessary when any appliance is used by or near children or by disabled people.

6.NEVER place air purifier in an area where it is accessible to children.

7.WARNING: always unplug the air purifier before moving it, opening the grill, changing filters, cleaning or whenever the air purifier is not in use. Be sure to pull by the plug and not the cord.

8.Never block the air openings, grills/outlets or place on a soft surface such as a bed or sofa, as this could cause the unit to tip over, blocking the Air Intake Opening/Grill.

9.Never drop or insert any object into any openings.

10.To protect against electrical hazards, DO NOT immerse in water or other liquids. Do not use near water.

11.DO NOT operate any appliance with a damaged cord or plug, after the appliance malfunctions, or if it has been dropped or damaged in any manner. Return appliance to manufacturer for examina- tion, electrical or mechanical adjustment or repair.

12.Use appliance only for intended household use as described in this manual. Any other use not rec- ommended by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended may cause hazards.

13.DO NOT use outdoors.

14.DO NOT puncture filters

15.Air purifier should be unplugged when not in use.

16.NEVER use detergents, gasoline, glass cleaner, fur- niture polish, paint thinner, or other household solvents to clean any part of the air cleaner.

17.DO NOT attempt to repair or adjust an electrical or mechanical functions on this unit. Doing so will void your warranty. The inside of the unit con- tains no user serviceable parts. All servicing should be performed by qualified personnel only.

18.DO NOT plug the cord in with wet hands: electric shock could result.

19.WARNING: To reduce the risk of fire or electric shock, DO NOT use this air purifier with any solid state speed control device.

20.Keep away from heated surfaces and open flames.

21.DO NOT place anything on top of unit.

22.To avoid risk of fire, DO NOT place air purifier against or within 3 feet of any heat source.

PLEASE READ AND

SAVE THESE

IMPORTANT SAFETY

INSTRUCTIONS

THIS PRODUCT IS EQUIPPED WITH A POLARIZED AC (Alternating Current) PLUG (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, con- tact qualified personnel to install the proper outlet.

DO NOT DEFEAT THE SAFETY PURPOSE OF THIS POLARIZED PLUG IN ANY WAY.

Consumer Safety Information

Note: This is an electrical appliance and requires attention when in use.

Note: DO NOT block air intake grill or filtered air outlet.

Cord and Plug Installation Safety Instructions

The length of cord used on this appliance was selected to reduce the hazards of becoming tan- gled in, or tripping over a longer cord. If a longer cord is necessary an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the rating of the air purifier (5 Amps or 600 Watts). Care must be taken to arrange the extension cord so that it will not drape over the countertop or tabletop where it can be pulled on by children or acciden- tally tripped over.

Page 2
Image 2
GE 106633, 106643, 106653 warranty Please Read and Save These Important Safety Instructions

106633, 106653, 106643 specifications

GE 106653, 106643, and 106633 are advanced gas turbine models produced by General Electric, aimed at enhancing power generation efficiency and reliability. These models represent a significant leap in turbine technology, incorporating cutting-edge design features and innovative materials.

The GE 106653 gas turbine is known for its high efficiency and environmental performance. It utilizes advanced aerodynamics and materials that allow for a higher combustion temperature, improving the thermal efficiency of power cycles. This model is equipped with a state-of-the-art combustion system that minimizes nitrogen oxide (NOx) emissions, making it an eco-friendly option for power generation in urban environments.

Model 106643 builds on the foundation of its predecessor by integrating enhanced digital technologies. The turbine features advanced sensors and control systems that optimize performance and operational stability. These digital advancements allow for predictive maintenance, monitoring turbine health in real-time, and ensuring maximum uptime. This model is designed with modular components, facilitating easier maintenance and quicker part replacement to reduce downtime.

The 106633 model is designed for a wide range of applications, including industrial power plants and co-generation facilities. Its versatility is one of its main characteristics, capable of operating on various fuels, including natural gas and alternative fuels. The model's design includes a robust airfoil structure that improves aerodynamics and increases output power. Furthermore, it incorporates advanced cooling technologies that enhance material longevity and performance under high-temperatures.

Across all three models, GE has placed a significant emphasis on reducing the environmental footprint of its turbines. Each model features enhanced emission control technologies, ensuring compliance with global standards for emissions and noise reduction.

In summary, GE 106653, 106643, and 106633 gas turbines represent the forefront of energy technology, combining advanced aerodynamics, digital integration, and environmental sustainability. With their high efficiency, low emissions, and innovative designs, these turbines are poised to play a crucial role in meeting global energy demands while promoting a cleaner environment.