F E AT U R E S - O P E R AT I O N

How the HEPA Air Cleaner Works

Your GE Brand HEPA Air Purifier draws dirty air through the front air intake grill area. This air is then passed though a foam pre-filter, a carbon filter and HEPA filter, which helps retain the particles in the air such as dust, smoke, pollen, mold spores and pet dan- der. The resulting filtered air is directed back into the room from the top outlet grill.

NOTE: This air purifier filter removes 99.97% of air- borne particles as small as 0.3 microns from air passing through it.

Dual Position

The air purifier can stand upright or lie on its side. It is designed to fit with its back flush against a wall. When positioning the unit, please be sure the air inlet grill, filters and air outlet are not blocked to ensure maximum airflow.

OPERATING INSTRUCTIONS

1.Select a location where the air intake grill and filtered air outlet are not obstructed.

2.Plug into a 120V AC electrical outlet.

3.The air purifier is now ready for your use. Please set the unit to the desired speed setting; High , Medium , Low or Sleep .

FILTER LIFE MONITOR

The filter life monitor uses a series of lights to give you an indication of the remaining filter life. With the new filters the top light will be illuminated green. As the fil- ter life progresses the filter life indicator will move to yellow, and your HEPA filters should be checked for particulate accumulation. When the filter life indicator light is red, it is time to change the HEPA filters.

PRE-OPERATING INSTRUCTIONS

1.After removing the unit from the box, take the plastic covering off the unit and discard it.

2.Place unit with air intake grill pointing up.

3.Open the door of the air purifier.

4.The Carbon filters are packed in a plastic bag loose inside the box. Please remove the plastic and discard.

5.The Carbon filters should be put on each of the HEPA filters. The plastic tabs on the HEPA filter will hold the carbon in place. (fig. 1.)

6.Close the air purifier door by pushing firmly against the right hand side of the door.

CLEANING AND MAINTENANCE INSTRUCTIONS

1.Turn the air purifier off and unplug it before cleaning.

2.The outside of the air purifier can be cleaned with a soft, clean dampened cloth.

3.The filtered air outlet on the top of the unit can be cleaned of dust with a small, soft brush.

4.If you wish to clean the inside of the air purifier, please only use a dry, soft cloth to wide it down.

Figure 4

A. Filtered Air

 

Outlet

A

B. Speed Control

 

Knobs

B

C. Filter Life

Monitor

C

D. Air Intake Grill

D

E. Power Cord

F. Door

 

E

 

F

 

 

 

Figure 1

A

B

C

A. Carbon Filter

B. HEPA Filter

C. Plastic tabs

Page 2 Page 4
Page 3
Image 3
GE 106643, 106653 At U R E S O P E R At I O N, How the Hepa Air Cleaner Works, Operating Instructions, Filter Life Monitor
Page 2 Page 4

106633, 106653, 106643 specifications

GE 106653, 106643, and 106633 are advanced gas turbine models produced by General Electric, aimed at enhancing power generation efficiency and reliability. These models represent a significant leap in turbine technology, incorporating cutting-edge design features and innovative materials.

The GE 106653 gas turbine is known for its high efficiency and environmental performance. It utilizes advanced aerodynamics and materials that allow for a higher combustion temperature, improving the thermal efficiency of power cycles. This model is equipped with a state-of-the-art combustion system that minimizes nitrogen oxide (NOx) emissions, making it an eco-friendly option for power generation in urban environments.

Model 106643 builds on the foundation of its predecessor by integrating enhanced digital technologies. The turbine features advanced sensors and control systems that optimize performance and operational stability. These digital advancements allow for predictive maintenance, monitoring turbine health in real-time, and ensuring maximum uptime. This model is designed with modular components, facilitating easier maintenance and quicker part replacement to reduce downtime.

The 106633 model is designed for a wide range of applications, including industrial power plants and co-generation facilities. Its versatility is one of its main characteristics, capable of operating on various fuels, including natural gas and alternative fuels. The model's design includes a robust airfoil structure that improves aerodynamics and increases output power. Furthermore, it incorporates advanced cooling technologies that enhance material longevity and performance under high-temperatures.

Across all three models, GE has placed a significant emphasis on reducing the environmental footprint of its turbines. Each model features enhanced emission control technologies, ensuring compliance with global standards for emissions and noise reduction.

In summary, GE 106653, 106643, and 106633 gas turbines represent the forefront of energy technology, combining advanced aerodynamics, digital integration, and environmental sustainability. With their high efficiency, low emissions, and innovative designs, these turbines are poised to play a crucial role in meeting global energy demands while promoting a cleaner environment.
Top Page Image Contents