GE 106658 Save These Instructions Operating Instructions, Maintenance, Special Features

SAVE THESE

INSTRUCTIONS

OPERATING

INSTRUCTIONS

1.Your lighted makeup mirror will adjust to 15 different angles. Simply tilt the mirror housing back and place the metal brace in the desired slot on the bar.

2.Take the plug and insert into any standard wall outlet (120 Volt AC).

3.Now determine the appropriate light setting for applying your makeup. Turn the indicator knob to the setting. This lighted mirror produces intimate light- ing for shadow-free makeup applica- tions. Choose either the regular or mag- nified mirror for viewing.

4.After use, turn dial to “OFF” position, unplug and store mirror in a safe location.

SPECIAL FEATURES

This lighted makeup mirror uses incan- descent light bulbs with special coating, reproducing shadow-free lighting in three different settings: home, office and day.

This mirror has a courtesy outlet for styling appliances, 12 amp max.

REPLACEMENT BULBS

Replacing the bulbs in your GE Lighted

Mirror is easy. Call 1-877-207-0923 for instructions on ordering replacement light bulbs. Then simply follow the instructions below.

1.Unplug your Lighted Mirror.

2.Open the doors and look for the thumb indentation in the middle of each lens (the cover over the light bulbs).

3.With a coin or the tip of a screwdriver, carefully lift up the lens.

4.Reach in and unscrew the used light bulb and replace it with a light bulb of the same color (blue bulbs on top, white bulbs on the bottom).

5.Slide the lens back into position and snap it closed (the snaps are located on top and bottom of the lens).

6.Now you can plug your mirror back in. It is ready for use.

MAINTENANCE

Your lighted mirror is designed for household use, and is virtually mainte- nance-free. No lubrication is needed. If cleaning becomes necessary, disconnect the appliance from the power source and wipe exterior with a damp cloth. Clean mirror surfaces with a glass clean- er. If any abnormal condition occurs, unplug the lighted mirror, allow it to cool, and return it to the place of pur- chase for exchange.