TROUBLESHOOTING GUIDE
Problem | Solution |
No dial tone. | • Check hook switch to make |
Won't dial out | sure it pops up. |
| • Make sure speakerphone indicator comes |
| on (if using speakerphone.) |
| • Make sure TONE/PULSE is set to correct |
| position. |
| • Unplug the phone, wait 30 seconds, and |
| plug the phone back in. |
|
|
Phone doesn’t ring | • Check RINGER VOLUME. |
| • Could have too many phones on one |
| line. (The total LN of all phones should |
| not be greater than the maximum LN |
| for your calling area, Usually 5.) |
|
|
Low handset or | • Check the volume settings (see p. 8). |
speaker volume |
|
|
|
Light and tone | • This is normal as power is fluctuating |
feedback flutter when | with phone outpulsing. |
dialing in PULSE mode. |
|
|
|
Can’t be heard by | • Make sure phone cord is securely |
other party | plugged in. |
| • Make sure MUTE indicator is off. |
|
|
Memory dialing | • Make sure you entered numbers |
| correctly. (See "Memory Dialing.") |
|
|
12
