5. Troubleshooting
1.Unit does not turn on.
•Make sure the power cable is connected properly.
•Check the fuse.
•Check the voltage selector
2.AF display moves, but there is no sound output.
•Check volume level.
•Check audio cable.
•Check the settings on your amplifier
3.The effective receiving distance decreases.
•Change batteries.
•Check for any devices that may be causing interference.
4.Sound Quality Deteriorates
•Change Batteries.
•Check for any devices that may be causing interference.
•Do not use two machines with the same frequency at the same time.
Caution:
Do not open the unit. There are no user serviceable parts inside. Refer service to a qualified technician.
6. Specifications
System Specifications
Carrier Frequency:. . . . . . . . . . . . . . . . . . . . . . UHF
Frequency Stabilization . . . . . . . . . . . . . . . . < ±30ppm
Dynamic Range: . . . . . . . . . . . . . . . . . . . . . . . . More Than 90dB
Total Harmonic Distortion: . . . . . . . . . . . . Less Than 0.5%
Frequency Response:. . . . . . . . . . . . . . . . . . .
Audio Output Level:. . . . . . . . . . . . . . . . . . . . Unbalanced Out: 0 – ±400mV
Balanced Out: 0 – ±200mV
Receiver Specifications
Power Supply: . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 110 60HZ/220V 50HZ or DC12V
Power Consumption: . . . . . . . . . . . . . . . . . . . . 5 Watts
S/N Ratio: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > 90dB
Image & Spurious Rejection: . . . . . . . . . . > 80dB
Border Upon Channel Rejection:. . . . . . > 80dB
Receiving Sensitivty:. . . . . . . . . . . . . . . . . . . . <10dBuV(SINAD=30dB)
5
