
2. Installation of the Receiver
ANT B |
|
| ANT A |
OUT B | MIX OUT | OUT A | DC12 AC: 110V/220V 50/60Hz |
Fig. 3
1. Power Connection
Connect the AC power cable to the 110/220V AC jack (9) and the other end into an AC outlet. Check the voltage selector (10) as shown in Fig. 4.
ANT A
DC12 AC: 110/220V 50/60Hz
Fig. 4
2. Audio Output Connection:
(A) 1/4” Unbalanced Output: Connect a 1/4” cable from the unbalanced output jack (7) of the receiver to the input jack of the mixer or amplifier, as shown in Fig. 3. This outputs the sound from both microphones together.
(B) XLR Balanced Output: Connect an XLR cable from the balanced output jack (8) of the receiver to the input jack of the mixer or amplifier, as shown in Fig.3. There are two individual outputs corresponding to the two microphones.
1 2 1:GND 2:HOT +
3
3:COLD
Fig.5
2