11
SETTING UP YOUR STATION ADDRESS
Your phone has the ability to be set up as either a 2-9451 (the default), or a
2-9450. If you have an existing 2-9450 system, this phone can be set to be
fully compatible with your system. See “Changing the Phone to a 2-9450
Model”.
The display reads
Addr-
.
1. Enter the station address number you want
to assign (01-16) or press the
corresponding memory button. The display
indicates what station you have entered.
2. Press the # key to confirm.The INTERCOM
indicator flashes red as it checks the
system line connections and station
address. If the line cords are connected
properly and the station address is valid,
you will hear a confirmation tone. This
indicates that the station address has been
successfully assigned.
VERY IMPORTANT: In order to have full system operation of your phone
(i.e. intercom, transfer, page, etc.), lines 1 and 2 must be connected and
common to all phones connected to the system. Only other 2-9451 or 2-9450
models are compatible for full system operation. Also, the telephone lines
must be connected before AC power is connected. The phone may not install
properly, otherwise.
STORE IN TIMER TIME SET MEMO REVIEW LOWER
1234
5678
9101112
13 14 15 16
BUSY REDIAL FLASH PAUSE TRANSFER CONF CALL
PRIVACY LINE 4
LINE 3
LINE 2
LINE 1
INTERCOM
VOLUME
HEADSET MUTE SPEAKERPHONE HOLD
WXYZ
9
MNO
6
DEF
3
#
TUV
8
JKL
5
ABC
2
OPER
0
PQRS
7
GHI
4
1
TONE
*
INTERCOM
indicator
12343EXT.
NUMBER
REDIAL
LINE
DATA PORT
TONE