29
MEMORY
Each of the 16 memory buttons has the capability of storing 2 separate
telephone numbers (up to 30 digits each). Each memory button accesses
an upper and a lower memory location. The LOWER button accesses those
numbers stored in the lower memory locations.
STORING A NUMBER
1. Press the STORE IN button. The STORE indicator comes on.
2. Enter the phone number you want to store using the keypad digits. The
numbers you enter show on the display.
3. Press STORE IN again. The STORE indicator blinks red.
4. Press the memory location button (1-16) where you want to store the
number. If you want to store it in upper memory, simply press the
memory location button. If you want to store it in lower memory, press
the LOWER button. The red indicator comes on. Press the memory
location button where you want to store the number.
5. For future reference, you may want to write the name or number of the
party you have stored in this location in the corresponding space on the
memory index card.
6. Repeat steps 1-5 for any additional numbers you want to store, up to a
total of 32.
7. To cancel the storing procedure at any time, press STORE IN. If the
indicator is blinking, press it once. If it is continuously lit, press it twice.
NOTE: The storage procedure will automatically cancel after 15 seconds if no
keys are pressed.
Also, when pulse mode is used, pressing the TONE “*” key before
programming will store all digits in tone.