27
NOTE: You will hear an error tone if the station address is not valid or not
connected to the system. If the station you want to reach is busy, the display
will show BUSY and the party will hear a pending tone, alerting him of the
intercom. If the party’s station is in Do Not Disturb (DND) mode, your
station’s PRIVACY indicator will flash. To override DND, see “Overriding a
Station Using Do Not Disturb”.
OVERRIDING A STATION USING DO NOT DISTURB
1. Press INTERCOM.
2. Press the memory location for the station you want to reach. If the
station is in Do Not Disturb (DND), the display will read

DND

and the
PRIVACY indicator will flash.
3. To override DND, press LOWER, then PRIVACY. The intercom will then
ring at the desired station.
NOTE: This only overrides the privacy at the station you are trying to reach.
All other stations using DND will be unaffected.
RECEIVING AN INTERCOM
The INTERCOM indicator will flash red to let you know someone is trying
to intercom you. The display will also read

Int-

followed by the station
address attempting to reach you. Press INTERCOM. (Pick up the handset
or press HEADSET if you want to use it instead.)
PAGING ALL STATIONS
1. Lift the handset.
2. Press PAGE and listen for the beep. The other stations will automatically
activate their speakphones and receive your page.
3. Talk into the handset. You will have 30 seconds paging in this mode.
After 30 seconds, the page will be cancelled.
4. When finished, hang up.
NOTE: If no page group number is assigned, all stations will be paged.