TROUBLESHOOTING GUIDE
CORDLESS PHONE SOLUTIONS
Problem | Solution | |
No dial tone | • | Check installation: |
|
| — Is the base power cord connected to a working outlet? |
|
| — Is the telephone line cord connected to the base unit |
|
| and the wall jack? |
| • Connect another phone to the same jack; the problem | |
|
| might be your wiring or local service. |
| • Is the handset out of range of the base? | |
| • Make sure the battery is properly charged (12 hours). | |
| • Is the battery pack installed correctly? | |
| • | Did the handset beep when you pressed the TALK button? |
|
| Did the |
|
| be charged. |
| • Place the handset in the base for at least 20 seconds. | |
|
|
|
Dial tone is OK, | • | Make sure the TONE/PULSE switch on the base is |
but can’t dial out |
| correctly set . |
|
|
|
Handset does not ring | • | Make sure the RINGER switch on the handset is turned to |
|
| ON. |
| • Move closer to the base. The handset may be out of range. | |
| • You may have too many extension phones on your line. Try | |
|
| unplugging some phones. |
| • Check for dial tone. | |
|
|
|
You experience static, | • | Change channels. |
noise, or fading in and out | • | Move closer to base (handset might be out of range). |
| • Does the base need to be relocated? Make sure base is not | |
|
| plugged into an outlet with another household appliance. |
| • | Charge battery. |
|
|
|
39
