Using the bridge surface unit
Using the dual surface unit
Using Your Cooktop
Radiant Cooktop
Make sure the pan rests flat on the glass cooktop.
When the select knob points to , the CONTROL knob controls both the left front surface unit and the bridge area.
Choose pans that match the circle/bridge area as closely as possible.
When the select knob points to ,the CONTROL knob controls the left front surface unit only.
NOTE: You can create an oblong heated area by using the left rear unit in addition to the front unit bridge combination.
The right front surface unit has 2 cooking sizes to select | Large 9″ | |||
from so you can match the size of the unit to the size of | surface unit | |||
setting |
|
|
| |
the cookware you are using. |
|
|
| |
|
|
|
| |
To use the large (9 inch) surface unit, turn the | Small 6″ |
|
| |
| ||||
selector knob clockwise to . Push in and | surface unit | |||
turn the control knob to the desired setting. | setting | |||
|
|
|
| |
The unit will heat the entire area contained by |
|
|
|
|
the larger circle. |
|
|
|
|
To use the small (6 inch) surface unit, turn the |
|
|
|
|
selector knob counterclockwise to . Push in |
|
|
|
|
and turn the control knob to the desired setting. |
|
|
|
|
The unit will only heat the area inside the |
|
|
|
|
smaller circle. |
|
|
|
|
10