Using Your Cooktop
Radiant Cooktop
How to set the controls
Push the knob in and turn in either direction to the setting you want.
At both OFF and HI the control “clicks” into position. You may hear slight “clicking” sounds during cooking, indicating the control is keeping the power level you set.
The controls for the radiant surface units can be set anywhere between LO and HI for an unlimited number of heat settings. With the infinite switch the coil cycles on and off to maintain your selected control setting.
The control must be pushed in to set only from the OFF position. When the control is in any position other than OFF, it may be rotated without pushing it in.
The UNIT ON indicator light will glow when any surface unit is on.
Cooktop temperatures increase with the number of surface units that are on. With 3 or 4 units turned on, surface temperatures are high, so be careful when touching the cooktop.
A HOT SURFACE indicator light will glow when any radiant element is turned on, and will remain on until the surface is cooled to approximately 150°F.
NOTE:
•It comes on when the unit is hot to the touch.
•It stays on even after the unit is turned off.
•It glows brightly until the unit is cooled to approximately 150°F.
Push the knob in and turn in either direction
to the desired heat setting.
8
