9
OPERATION
Water spray
noTE:This function can be used anytime and does not have any eect on other
settings. It can beusedto helpironheavy fabricsordicult areas(collars,pockets,
sleeves, creases, etc). It can also be used when ironing delicate fabrics, which cannot
be steam ironed.
• Filltheironwithwater( filling the iron with water).
• Setthetemperature( Setting the temperature).
• Aimthespraynozzle(1) at the garment and then press the spray button (7).
• A spray of water is emitted from the spray nozzle (1) (ill. h
).
noTE: The sprayfunctiononlyworkswhenwaterhasbeenlledintothereservoir(12).
Ifthesprayis beingusedfortherst time,orifthe ironhasbeenstandingfor some
time, you may need to press the spray button (7) a few times to prime the spray
pump before it works correctly.
steam blast
noTE: This function provides an extra amount of steam to remove stubborn creases.
for extra stubborn creases, wait a few seconds before pressing the steam blast
button (6) again. We recommend pressing the steam blast button (6) every 2-3
seconds.
noTE: This function only works when there is water in the water reservoir (12) and the
iron is set for steam output.
• Filltheironwithwater( filling the iron with water).
• Setthetemperature( Setting the temperature).
• Pressthesteam blast button (6).
• A blast of steam is released from the nozzles in the soleplate (15) (ill. i
).
noTE: The iron might be too hot for some fabrics when using the steam setting.
Iron-169234-04 (GB).indd 9 5/13/10 9:15 AM