10
OPERATION
Vertical steam ironing
noTE: This function provides an extra amount of steam to remove creases on delicate
garments in a hanging position, hanging curtains or other hanging garments. during
use, do not let the soleplate (15) touch delicate fabrics! do not direct steam toward
people or pets. danger of scalding!
• Preparetheironforsteamironing( Steam ironing).
• Hold the iron about 6 inches away from the garment to be ironed.
• Pressthesteamblast button (6). Now, steam blasts out and penetrates into the
garment to remove creases (ill. j
).
• Afteruse,setthetemperaturecontrol(5) to o.
noTE: The iron may be too hot for some fabrics when using the steam setting.
dry ironing
• Connect the iron to a suitable wall outlet.
• Slide the function control (4) to the dry ironing position (ill. g
).
• Set the temperature ( Setting the temperature).
• Place the iron on its heel (10) (ill. d
) and let it heat up completely.
• Afteruse,turntheironoanddisconnectfromthewalloutlet.Ifthesprayfunction
has been used, empty the water reservoir (12) after the iron has cooled completely
(Turningtheironoandemptyingthewaterreservoir).
noTE: When changing the temperature setting, please allow the steam iron 2 minutes
to adjust.
noTE: The spray function only works when there is water in the water reservoir (12). If
thesprayisbeingusedforthersttime,oriftheironhasbeenstandingforsometime,
you may need to press the spray button (7) a few times to prime the spray pump
before it works correctly.
Anti-drip function
• The anti-drip system is designed to prevent water from escaping from the
soleplate (15) when the iron is not heated enough. during use, the anti-drip system
may emit a clicking sound, particularly while heating up or cooling. This is perfectly
normal and indicates that the system is functioning normally.
Iron-169234-04 (GB).indd 10 5/13/10 9:15 AM