Installation Instructions

ELECTRICAL REQUIREMENTS

Read these instructions completely and carefully.

WARNING—TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK AND PERSONAL INJURY:

DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.

Washer must be electrically grounded in accordance with local codes and ordinances or, in the absence of local codes, in accordance with the NATIONAL ELECTRICAL CODE, ANSI/NFPA NO. 70.

CIRCUIT – Individual, properly polarized and grounded

15-amp branch circuit fused with 15-amp, time-delay fuse or circuit breaker.

POWER SUPPLY 2-wire, with ground, 120-volt, single-phase, 60-Hz, Alternating Current.

OUTLET RECEPTACLE – Properly grounded 3-prong receptacle to be located so the power supply cord is accessible when the washer is in an installed position.

GROUNDING REQUIREMENTS

WARNING: Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a licensed electrician if you are in doubt as to whether the appliance is properly grounded.

1.The washer MUST be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electrical shock by providing a path of least resistance for electrical current.

2.Since your washer is equipped with a power supply cord having an equipment-grounding conductor and a grounding plug, the plug MUST be plugged into an appropriate, copper-wired receptacle that is properly installed and grounded in accordance with all local codes and ordinances or in the absence of local codes, with the National Electrical Codes, ANSI/NFPA 70 (latest edition). If in doubt, call a licensed electrician. DO NOT cut off or alter the grounding prong on the power supply cord. In situations where a two-slot receptacle is present, it is the owner’s responsibility to have a licensed electrician replace it with a properly grounded three-prong, grounding-type receptacle.

WATER SUPPLY REQUIREMENTS

Hot and cold water faucets MUST be installed within

42 inches (107 cm) of your washer’s water inlet. The faucets MUST be 3/4(1.9 cm) garden hose-type so inlet hoses can be connected. Water pressure MUST be between 10 and 120 pounds per square inch. Your water department can advise you of your water pressure. The hot water temperature should be set to deliver water at 120° to 140°F (48°–60°C)

to provide proper Automatic Temperature Control (ATC) performance.

DRAIN REQUIREMENTS

1.Drain capable of eliminating 17 gals (64.3 L) per minute.

2.A standpipe diameter of 1-1/4(3.18 cm) minimum.

3.The standpipe height above the floor should be:

Minimum height: 30(76 cm)

Maximum height: 96(244 cm)

To achieve a drain height above 58(147 cm), to a maximum of 96, a service kit must be purchased through GE Service (WH49X301).

BACK

96”

(244 cm)

Max.

30”

(76 cm)

Min.

NOTE: The drain hose attached to the washer can reach a 58-high standpipe. For a higher standpipe, contact an authorized parts distributor.

16

Page 16
Image 16
GE 175D1807P633 Electrical Requirements, Grounding Requirements, Water Supply Requirements, Drain Requirements

175D1807P633 specifications

The GE 175D1807P633 is a notable component within the realm of industrial automation and control systems, showcasing the ingenuity and advanced capabilities synonymous with General Electric. This specific model is recognized for its robustness and reliability, making it a go-to choice for industries that require precision and efficiency.

One of the main features of the GE 175D1807P633 is its compatibility with various industrial environments. Built to withstand challenging conditions, it excels in situations characterized by extreme temperatures and vibrations, enabling it to function seamlessly in manufacturing plants, energy sectors, and other demanding applications. This durability is crucial in minimizing downtime, ensuring that operations continue smoothly.

The GE 175D1807P633 incorporates cutting-edge technologies that enhance its performance. One of these key technologies is its advanced signal processing capabilities, which allow for greater accuracy and faster response times. This feature is particularly important in automation processes where timing is critical. Additionally, the unit often includes built-in diagnostics that offer real-time monitoring, enabling users to anticipate and address potential issues before they escalate into significant problems.

Another important characteristic of the GE 175D1807P633 is its user-friendly interface. Designed with operators in mind, it allows for straightforward integration with existing systems. This ease of integration is further supported by a variety of communication protocols, streamlining data exchange and enhancing collaboration among different components within an industrial setup.

The versatility of the GE 175D1807P633 is another highlight, as it can be utilized in numerous applications ranging from process automation to discrete manufacturing. Its adaptability makes it suitable for a variety of industries, including automotive, pharmaceuticals, and food processing.

Furthermore, this model is designed with energy efficiency in mind, aligning with modern sustainability goals. Its operational efficiency not only reduces energy consumption but also translates into cost savings for companies that deploy it.

In conclusion, the GE 175D1807P633 stands out as a powerful, adaptable, and efficient component in the industrial automation landscape. With features that enhance performance and reliability, it exemplifies GE’s commitment to innovation and excellence in engineering, making it a preferred choice for industries striving for optimized operational efficiency.