Operating Instructions Safety Instructions
Installation | Instructions |
Consumer Support Troubleshooting Tips
Control settings.
3 | Soil Level |
| Changing the SOIL level increases or decreases the wash time to remove different amounts of soil. |
| To change the SOIL level, press the SOIL level button until you have reached the desired setting. |
| You can choose between Extra Light, Light, Normal, Heavy or Extra Heavy soil. |
4 | Spin Speed |
Changing the SPIN setting changes the final spin speed of the cycles. Always follow the garment | |
| manufacturer’s care label when changing the SPIN setting. |
| To change the SPIN setting, press the SPIN setting button until you have reached the desired |
| setting. You can choose between No Spin, Low, Medium, High or Extra High Spin. Higher spin |
| speeds are not available on certain cycles, such as Delicates. |
| Higher spin speeds remove more water from the clothes and will help reduce dry time, but may |
| also increase the possibility of setting wrinkles on some fabrics. |
5 | Wash Temp |
Adjust to select the proper water temperature for the wash cycle. The rinse water is always cold | |
| to help reduce energy usage and reduce setting of stains and wrinkles. |
| Follow the fabric manufacturer’s care label when selecting the wash temperature. |
| To change the wash temperature, press the TEMP button until you have reached the desired |
| setting. You can choose between Tap Cold, Cold, Warm, Hot or Sanitize. The Sanitized wash |
| temperature is not available on certain cycles, such as Delicates. |
| When selecting the Sanitize wash temperature, the washer increases the water temperature to |
| sanitize and kill more than 99% of many common bacteria found in home laundry. The sanitize |
| wash temperature is only available on the Whites/Heavy Duty wash cycle. For best results, select |
| the heavy soil setting when using the Sanitize wash temperature setting. |
6 | Start/Pause |
Press to start a wash cycle. If the washer is running, pressing it once will pause the washer and |
unlock the door. This function can be used to add garments during a cycle. Press again to restart the wash cycle.
NOTE: If the washer is paused and the cycle is not restarted within 15 minutes, the current wash cycle will be cancelled.
NOTE: In some cases the washer will drain first, then unlock the door when it is paused.
NOTE: The washer performs automatic system checks after pressing the START/PAUSE button. Water will flow in 45 seconds or less. You may hear the door lock and unlock before water flows; this is normal.
6
