Customer Service Troubleshooting Tips Installation Instructions Operating Instructions Safety Information

IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong

(grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

Never unplug your refrigerator by pulling on the power cord.

Always grip plug firmly and pull straight out from the outlet.

Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the refrigerator away from the wall, be careful not to roll over or damage the power cord.

 

 

USE OF ADAPTER PLUGS

 

 

(Adapter plugs not permitted in Canada)

 

 

 

 

 

Because of potential safety hazards under certain conditions,

 

 

 

 

we strongly recommend against the use of an adapter plug.

 

 

However, if you must use an adapter, where local codes permit, a

 

 

temporary connection may be made to a properly grounded 2-prong

6

 

wall outlet by use of a UL-listed adapter available at most local

 

hardware stores.

Page 5 Page 7
Page 6
Image 6
GE 1825 owner manual USE of Adapter Plugs
Page 5 Page 7

1825 specifications

The GE 1825 is a remarkable evolution in the world of gas turbine technology, produced by General Electric, a company renowned for its innovative engineering and commitment to power generation solutions. Launched as part of GE's 7FA series, the 1825 model has established itself as a pivotal asset for both industrial and utility applications.

One of the standout features of the GE 1825 is its design efficiency. Engineered to deliver a high output while ensuring low emissions, this gas turbine operates effectively in combined cycle settings, making it an ideal choice for power plants aiming to optimize their production capabilities. With a robust output capability of around 1825 megawatts, the turbine is well-suited for large-scale operations requiring reliable energy generation.

The GE 1825 employs advanced technologies to enhance its performance. The turbine incorporates sophisticated air-cooled components, which help maintain operational integrity at elevated temperatures. This design focuses on durability and longevity, minimizing the need for frequent maintenance. Moreover, the GE 1825 turbine utilizes a state-of-the-art combustion system that not only boosts its thermal efficiency but also reduces nitrogen oxide emissions, aligning with global environmental standards.

Another notable characteristic of the GE 1825 is its operational flexibility. This turbine can seamlessly adapt to various fuel sources, including natural gas, distillate oil, and other alternative fuels. Such versatility enables power plants to optimize their fuel consumption based on market conditions and availability, thus achieving better economic performance.

In terms of control technologies, the GE 1825 is equipped with advanced digital systems that facilitate real-time performance monitoring and predictive maintenance. This capability allows operators to maintain optimal performance levels while ensuring that potential issues are identified and addressed before they escalate into critical problems.

Ultimately, the GE 1825 gas turbine stands as a testament to General Electric's commitment to energy innovation, providing cutting-edge technologies, exceptional efficiency, and operational flexibility. With its high power output, reduced emissions, and advanced control systems, it plays a crucial role in the evolving landscape of power generation, meeting both economic and environmental challenges in today’s energy market.
Top Page Image Contents