TROUBLE OR MALFUNCTION
Should your phone not operate properly, check the following before seeking service.
If still inoperative, disconnect the phone and try another phone Of one is available) or another cord to determine whather the problem is in the telephone, the cord or the line. If in the phone, discontinue its use and follow the SERVICE procedure in this manual. If in the line, notify the telephone company immediately. The telephone com-
PROBLEM
1. No dial tone.
2.Phone does no ring.
SOLUTION
●Check Cords: Are they inserted properly and securely?
Are they damaged?
●Check HOOK SWITCH: Does it fully extend when Handset is removed?
●Is RINGER VOLUME SWITCH in OFF position?
pany will charge for a service call if the problem is attributable to equipment you own.
●Are you using too many phones on one line? me total REN of all phones on the same line should not be greater than the maximum REN for your calling area. Usually 5. See (“FCC Registration Information” on back cover.)
●Perform checks under #1.
|
|
|
|
| |
3. Incoming | and | . Are other phones | off hmk | at same time? | |
outgoing | voice | If so, this is normal condition as wlume | drops | ||
volume too low | when additional | phones | are used | simul- | |
or none | at all | taneously. |
|
|
|
4.Light and tone ● This is normal as power is fluctuating when
feedback flutter the phone dails. when dialing in
Pulse mode.
5.Memory Dialing ● Dld you program numbers correctly?
~ | Problems | Did you follow proper diating sequence? |
| ● | |
|
| (Review Memory Section) |
6.Loss of Memoo ● Is 3V Lithium Batte~ in place correctly?
●Does it need to be replaced?
9
