Instructions

About the automatic icemaker.

A newly installed refrigerator may take 12 to 24 hours to begin making ice.

Tips Installation Instructions Operating Instructions Safety

On dispenser models, to access ice or reach the power switch:

Lift the bin, then pull it forward until the bin stops.

Lower the bin to access ice or reach the power switch.

NOTE: In order to take full advantage of the tilt-out ice bin, only store items on the shelf below the ice bin that are no taller than the lowest point on the bin.

Automatic Icemaker

The icemaker will produce seven cubes per cycle—approximately 100–130 cubes in a 24-hour period, depending on freezer compartment temperature, room temperature, number of door openings and other use conditions.

If the refrigerator is operated before the water connection is made to the icemaker, set the power switch in the O (off) position.

When the refrigerator has been connected to the water supply, set the power switch to the l (on) position.

The icemaker will fill with water when it cools to 15°F (–10°C). A newly installed refrigerator may take 12 to 24 hours to begin making ice cubes.

You will hear a buzzing sound each time the icemaker fills with water.

Throw away the first few batches of ice to allow the water line to clear.

Be sure nothing interferes with the sweep of the feeler arm.

When the bin fills to the level of the feeler arm, the icemaker will stop producing ice. It is normal for several cubes to be joined together.

If ice is not used frequently, old ice cubes will become cloudy, taste stale and shrink.

Special note about dispenser models:

■Dispenser models have a tilt-out ice bin. The bin can be tilted out as shown in the illustrations, and it will hold itself up while you take ice out or turn the icemaker power switch on and off. Be sure to put the bin back in place before closing the door.

■To restore your ice level from an empty bucket stage, the following steps are recommended:

12 hours after the first batch of ice has fallen into the bin, dispense 3 to 4 cubes.

After an additional 6 hours, dispense 3 to 4 cubes again.

These steps will restore your ice level in the shortest amount of time.

Power

Switch

Icemaker

Green

 

Power Light

Feeler Arm

 

NOTE: In homes with lower-than-average water pressure, you may hear the icemaker cycle multiple times when making one batch of ice.

Troubleshooting

Lift the bin, then pull it forward until the bin stops.

Removing Ice Bin (dispenser models)

CAUTION: The ice bin is heavy when full.

Set the power switch to the O (off) position before removing the bin.

When replacing the bin, be sure to press it firmly into place. If it does not go all the way back, remove it and rotate the drive mechanism 1/4 turn. Then push the bin back again.

Rotate

Drive Mechanism

Consumer Support

Dispenser Models only

Lift and pull forward again to remove the bin.

14

Page 13 Page 15
Page 14
Image 14
GE 200D2600P039 About the automatic icemaker, Automatic Icemaker, Special note about dispenser models
Page 13 Page 15

200D2600P039 specifications

The GE 200D2600P039 is a critical component widely used in various industrial applications, particularly in the fields of power generation and heavy machinery. This particular model is part of General Electric's robust lineup of industrial parts, known for their reliability, efficiency, and technological innovation.

One of the main features of the GE 200D2600P039 is its exceptional durability. Designed to withstand extreme operating conditions, this component is built using high-quality materials that guarantee long-term performance. Its rugged construction makes it suitable for use in environments characterized by high temperatures, vibrations, and potential exposure to corrosive substances.

In terms of technology, the GE 200D2600P039 leverages advanced engineering principles to deliver optimal functionality. It boasts precision manufacturing, which ensures tight tolerances and high performance. This precision not only contributes to its reliability but also enables seamless integration with existing systems.

Additionally, the GE 200D2600P039 incorporates advanced control technologies that enhance its operational capabilities. This model may feature sophisticated monitoring systems that allow for real-time performance tracking. Such capabilities can lead to proactive maintenance, minimizing downtime, and increasing overall efficiency in industrial operations.

The characteristics of the GE 200D2600P039 extend beyond its physical attributes. Its energy efficiency is a significant advantage, aligning with contemporary standards for reducing operational costs and environmental impacts. By optimizing energy use, this component plays a crucial role in enhancing the sustainability of industrial processes.

Moreover, the GE 200D2600P039 is designed for easy installation and maintenance. Its user-friendly design allows for straightforward integration into existing setups, reducing the need for extensive modifications. Maintenance procedures are simplified, enabling technicians to perform checks and repairs with minimal disruption to operations.

In conclusion, the GE 200D2600P039 is a feature-rich industrial component characterized by its durability, advanced technologies, and user-centric design. Its ability to operate reliably under harsh conditions while offering energy efficiency and ease of maintenance makes it an ideal choice for industries seeking robust solutions for power generation and machinery applications. As industries continue to evolve, the GE 200D2600P039 stands out as a testament to General Electric's commitment to innovation and performance in engineering.
Top Page Image Contents