Manuals / GE / Kitchen Appliance / Refrigerator

GE 200D2600P039 installation instructions About the temperature controls

Models: 200D2600P039

1 132
Download 132 pages 47.86 Kb
Page 5
Image 5

About the temperature controls.

GEAppliances.com

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The temperature controls are preset in the factory at 37°F for the refrigerator compartment and 0°F for the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings.

The temperature controls can display both the SET temperature as well as the actual temperature in the refrigerator and freezer. The actual temperature may vary slightly from the SET temperature based on usage and operating environment.

Setting either or both controls to OFF stops cooling in both the freezer and refrigerator compartments, but does not shut off electrical power to the refrigerator.

NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was not removed during installation, remove it now.

Safety Instructions Operating Instructions Installation

To change the temperature, press and release the WARMER or COLDER pad. The SET light will come on and the display will show the set temperature. To change the temperature, tap either the WARMER or COLDER pad until the desired temperature is displayed. Refrigerator temperatures can be adjusted between 34°F and 44°F and the freezer temperatures can be adjusted between –6°F and +6°F.

Once the desired temperature has been set, the temperature display will return to the actual refrigerator and freezer temperatures after 5 seconds. Several adjustments may be required. Each time you adjust controls, allow 24 hours for the refrigerator to reach the temperature you have set.

To turn the cooling system off, tap the WARMER pad for either the refrigerator or the freezer until the display shows OFF. To turn the unit back on, press the COLDER pad for either the refrigerator or freezer. The SET light will illuminate on the side you selected. Then press the COLDER pad again (on the side where the SET light is illuminated) and it will go to the preset points of 0°F for the freezer and 37°F for the refrigerator. Setting either or both controls to OFF stops cooling in both the freezer and refrigerator compartments, but does not shut off electrical power to the refrigerator.

Instructions Troubleshooting Tips

Performance Air Flow System

The Performance Air-Flow System is designed to maximize temperature control in the refrigerator and freezer compartments. This unique special feature consists of the Air Tower along the back wall of the refrigerator and the Air Tunnel on the bottom portion of the freezer rear wall. Placing food in front of the louvers on these components will not

affect performance. Although the Air Tower and the Air Tunnel can be removed, doing so will affect temperature performance. (For removal instructions, on-line, 24 hours a day, contact us at GEAppliances.com or call 800.GE.CARES. In Canada, contact us at geappliances.ca or call 1.800.361.3400.)

Consumer Support

5

Page 4 Page 6
Page 5
Image 5
GE 200D2600P039 About the temperature controls, Safety Instructions Operating Instructions Installation
Page 4 Page 6

200D2600P039 specifications

The GE 200D2600P039 is a critical component widely used in various industrial applications, particularly in the fields of power generation and heavy machinery. This particular model is part of General Electric's robust lineup of industrial parts, known for their reliability, efficiency, and technological innovation.

One of the main features of the GE 200D2600P039 is its exceptional durability. Designed to withstand extreme operating conditions, this component is built using high-quality materials that guarantee long-term performance. Its rugged construction makes it suitable for use in environments characterized by high temperatures, vibrations, and potential exposure to corrosive substances.

In terms of technology, the GE 200D2600P039 leverages advanced engineering principles to deliver optimal functionality. It boasts precision manufacturing, which ensures tight tolerances and high performance. This precision not only contributes to its reliability but also enables seamless integration with existing systems.

Additionally, the GE 200D2600P039 incorporates advanced control technologies that enhance its operational capabilities. This model may feature sophisticated monitoring systems that allow for real-time performance tracking. Such capabilities can lead to proactive maintenance, minimizing downtime, and increasing overall efficiency in industrial operations.

The characteristics of the GE 200D2600P039 extend beyond its physical attributes. Its energy efficiency is a significant advantage, aligning with contemporary standards for reducing operational costs and environmental impacts. By optimizing energy use, this component plays a crucial role in enhancing the sustainability of industrial processes.

Moreover, the GE 200D2600P039 is designed for easy installation and maintenance. Its user-friendly design allows for straightforward integration into existing setups, reducing the need for extensive modifications. Maintenance procedures are simplified, enabling technicians to perform checks and repairs with minimal disruption to operations.

In conclusion, the GE 200D2600P039 is a feature-rich industrial component characterized by its durability, advanced technologies, and user-centric design. Its ability to operate reliably under harsh conditions while offering energy efficiency and ease of maintenance makes it an ideal choice for industries seeking robust solutions for power generation and machinery applications. As industries continue to evolve, the GE 200D2600P039 stands out as a testament to General Electric's commitment to innovation and performance in engineering.