About TurboCool.™

How it Works

TurboCool™ rapidly cools the refrigerator compartment in order to more quickly cool foods. Use TurboCool when adding a large amount of food to the refrigerator compartment, putting away foods after they have been sitting out at room temperature or when putting away warm leftovers. It can also be used if the refrigerator has been without power for an extended period.

Once activated, the compressor will turn on immediately and the fans will cycle on and off at high speed as needed for eight hours. The compressor will continue to run until the refrigerator compartment cools to approximately 34°F (1°C), then it will cycle on and off to maintain this setting. After

8 hours, or if TurboCool is pressed again, the refrigerator compartment will return to the original setting.

How to Use

Press TurboCool. The refrigerator temperature display will show TC.

After TurboCool is complete, the refrigerator compartment will return to the original setting.

NOTES:

The refrigerator temperature cannot be changed during TurboCool.

The freezer temperature is not affected during TurboCool.

When opening the refrigerator door during TurboCool, the fans will continue to run if they have cycled on.

About ClimateKeeper2.™

Consumer Support Troubleshooting Tips Installation Instructions Operating Instructions Safety Instructions

How it Works

The new ClimateKeeper2™ is the industry’s most advanced refrigeration system, delivering optimum temperature and humidity performance to keep food fresh longer and reduce freezer burn, while maintaining E star-level efficiency.

The new ClimateKeeper2 system features two evaporators—one for the refrigerator and one for the freezer.

This provides two separate cooling systems for the entire unit, and separates the airflow between the fresh food and freezer sections during normal cooling operations.*

This ensures that the humidity levels in the fresh food section are significantly higher than in a conventional system,** allowing fresh produce and other unsealed foods to retain their moisture content and freshness longer. Moisture sensitive foods such as fresh fruit, salads, rice, etc., can now be stored on open shelves without excessive moisture loss. Due to the higher humidity in the refrigerator, you may on occasion experience fog or small amounts of moisture in the refrigerator compartment. This is normal and may come and go as different food loads and environmental conditions change. Wipe dry with a paper towel if desired.

6

The separate airflow system minimizes the mixing of air between the two compartments, which reduces odor transfer, resulting in improved taste of ice.

The ClimateKeeper2 system also reduces the number of defrosting cycles in the freezer evaporator, thereby improving the temperature maintained in the freezer and reducing freezer burn.

*Freezer air is used in the CustomCool feature.

**Testing shows a higher level of humidity in the Fresh Food section in ClimateKeeper2 refrigerators versus conventional units.

Page 5 Page 7
Page 6
Image 6
GE 200D2600P039 installation instructions About TurboCool, About ClimateKeeper2, How it Works, How to Use
Page 5 Page 7

200D2600P039 specifications

The GE 200D2600P039 is a critical component widely used in various industrial applications, particularly in the fields of power generation and heavy machinery. This particular model is part of General Electric's robust lineup of industrial parts, known for their reliability, efficiency, and technological innovation.

One of the main features of the GE 200D2600P039 is its exceptional durability. Designed to withstand extreme operating conditions, this component is built using high-quality materials that guarantee long-term performance. Its rugged construction makes it suitable for use in environments characterized by high temperatures, vibrations, and potential exposure to corrosive substances.

In terms of technology, the GE 200D2600P039 leverages advanced engineering principles to deliver optimal functionality. It boasts precision manufacturing, which ensures tight tolerances and high performance. This precision not only contributes to its reliability but also enables seamless integration with existing systems.

Additionally, the GE 200D2600P039 incorporates advanced control technologies that enhance its operational capabilities. This model may feature sophisticated monitoring systems that allow for real-time performance tracking. Such capabilities can lead to proactive maintenance, minimizing downtime, and increasing overall efficiency in industrial operations.

The characteristics of the GE 200D2600P039 extend beyond its physical attributes. Its energy efficiency is a significant advantage, aligning with contemporary standards for reducing operational costs and environmental impacts. By optimizing energy use, this component plays a crucial role in enhancing the sustainability of industrial processes.

Moreover, the GE 200D2600P039 is designed for easy installation and maintenance. Its user-friendly design allows for straightforward integration into existing setups, reducing the need for extensive modifications. Maintenance procedures are simplified, enabling technicians to perform checks and repairs with minimal disruption to operations.

In conclusion, the GE 200D2600P039 is a feature-rich industrial component characterized by its durability, advanced technologies, and user-centric design. Its ability to operate reliably under harsh conditions while offering energy efficiency and ease of maintenance makes it an ideal choice for industries seeking robust solutions for power generation and machinery applications. As industries continue to evolve, the GE 200D2600P039 stands out as a testament to General Electric's commitment to innovation and performance in engineering.
Top Page Image Contents