GE 200D8074P039 Replace the Base Grille, Start the Icemaker, SET the Controls, Ice bin

Installation Instructions

INSTALLING THE REFRIGERATOR (CONT.)

7

REPLACE THE BASE GRILLE

Replace the grille by installing the two Phillips head screws.

9START THE ICEMAKER

Set the icemaker power switch to the I (on) position. The icemaker will not begin to operate until it reaches its operating temperature of 15°F (–9°C) or below. It will then begin operation automatically. It will take 2–3 days to fill

the ice bin.

Power switch

NOTE:

In lower water pressure conditions, the water valve may turn on up to 3 times to deliver enough water to the icemaker.

8

SET THE CONTROLS

Set the controls to the recommended setting.

24