16
VIP MELODY
This features allow you to assign a specific melody to someone you want to get
your attention when the person calls. When a VIP melody is assigned and that
person calls, the unit rings the normal ring for the first ring and then follows
with VIP melody ring. You may choose from ten different polyphonic melodies
and may store up to 10 VIP records.
NOTE: This feature ONLY works when the following conditions are met.
1. You have subscribed to Caller ID.
2. You have your Caller ID record previously transferred to the memory. (Refer
to Storing CID Records in Internal Memory). “NO USER MEMORY” will show
in the display to remind the user to do CID record transfer first.
STORING VIP MELODY
1. With handset in standby mode.
2. Press MUTE/PROG button once to display the submenus; ROOM
MONITOR and HANDSET SETUP.
3. Press the CID/VOL (/\ or V) button to scroll to the HANDSET SETUP.
4. Press MUTE/PROG button to enter into this HANDSET SETUP.
5. Press the CID/VOL (/\ or V) button to scroll to VIP MELODY submenu.
6. Press MUTE/PROG button to select VIP melody feature and then
display VIP 1 record.
- If VIP1 does NOT contain any specific number/records, it will display
EMPTY.
7. Press CID/VOL (/\ or V) button to select the specific VIP melody
memory location (10 VIP locations) that does not contain any record.
8. Press MUTE/PROG button to display
SELECT MEMORY.
NOTE: If the memory location does not contain any CID memory records and
you are trying to mark a specific record as VIP MELODY, then "SELECT
MEMORY" will not be displayed. Instead, “NO USER MEMORY” will display in
prompt to alert the user.
9. Press CID/VOL (/\ or V) button to view the records from memory to be
selected as VIP.
10. Press MUTE/PROG button to confirm and then display
VIP MELODY01 to wait for the melody tone selection.