GE 21018 MOVE NEAR TO BASE, CONFIRM? 1 YES 2 NO, HANDSET NEEDS REGISTRATION, HANDSET X DEREGISTERED, 2 NO, 1 YES, 2 NO, 1 YES

19
4. If you select 1 YES, press the MUTE/PROG button and MOVE NEAR TO
BASE displays for 2 seconds, then CONFIRM? 1 YES 2 NO appears in the
display.
5. Press the touch-tone pad to select 1 YES or 2 NO , or use the CID/VOL (/\
or V) button to scroll to 1 YES or 2 NO .
6. If you select YES, press the MUTE/PROG button to confirm. You will hear
a confirmation tone. Then HANDSET X DEREGISTERED shows in the
display to confirm the handset is deregistered.
NOTE: When you complete the de-registration process, “HANDSET NEEDS
REGISTRATION” shows in the display. To use the handset, you must register
the handset.
GLOBAL DE-REGISTRATION
If one or more handsets becomes lost, you should de-register all handsets
to ensure proper system operation. Follow the steps below to de-register
both handsets at the same time.
WARNING: It is not recommended that a handset be de-registered unless
absolutely necessary because once a handset is de-registered, that handset's
telephone features cannot be used until the handset is re-registered.
1. Press and hold the page button on the base until the IN USE/CHARGE
indicator on the base flashes.
2. Press and hold the page button on the base again until the IN USE/
CHARGE indicator on the base flashes rapidly.
3. Press and release the page button on the base once. All handsets are de-
registered and HANDSET NEEDS REGISTRATION shows in the display.
DEFAULT SETTING
As you become familiar with this system, you may prefer to use the
system’s original settings. Follow the steps below to return to the factory
default settings.
1. Press the CID/VOL (/\ or V) button to scroll to the DEFAULT SETTING menu.